Menu
Your Cart
PLEASE BE AWARE NOT ALL PRODUCTS ARE "IN STOCK"- STOCK DEPENDANT ON SUPPLIER- PLEASE CALL 01206865544 or EMAIL SALES@6TWO1.COM for ACCURATE DELIVERY TIMES

Engine Harness

Engine Harness
Model: K2-BASE
Version 2 of the Rywire K-series engine harness was created to facilitate a more universal chassis, and harness routing preference. This style can be routed more like the OEM k-series engine harness through the center or more to the right on the firewall than it's Version 1 counterpart. This routing..
£773.36
Model: CHARGE-HARNESS
This is the Rywire charge harness for the starter and alternator leads. Made to use with the Rywire D-series & B-Series engine harnesses. This charge harness can be made for standard, and bulkhead applications...
£47.60
Model: B-INFINITY-HARNESS
The Rywire AEM Infinity 506/508 (6/8h) harness is a universal, fully populated race loom that incorporates all the essential functionality of the fastest Front wheel drive Hondas of today!If you are building a Front wheel drive race car and need the data and flexibility of the top ecu on the market,..
£1,189.77
Model: H1-MILSPEC
Our H (H22/H23) or F (F20B/Accord) Mil-spec wire harness is cross-compatible with both engine types. Ignition Distributors MUST be Internal coil type ONLY. There are quite a few options available. Please look through them carefully to make sure you get the right connectors! Component Type: Select yo..
£832.85
Model: K2-MIL-SPEC
Version 2 of the Rywire K-series Milspec Engine HarnessThis version was created to facilitate a more universal chassis, and harness routing preference. This style can be routed more like the OEM k-series engine harness through the center or more to the right on the firewall than it's Version 1 count..
£1,069.61
Model: V3-SUB-RACE
This Universal Race Fuse/Relay Box is the prefect solution for any race car running the engine only. This harness comes with 5 relays and fuses to easily get our rywire harnesses to run in any car. Comes with 4 pin DTP connector for fuel pump, Fan, Spare output and switched output. This product was ..
£535.40
OBD1 Budget D & B-series Tucked Engine Harness OBD1 Budget D & B-series Tucked Engine Harness
Free Out Of Stock
This harness uses Mil-Spec Teflon coated wire with a maximum heat rating of 200°C.Our D-series and B-series compatible wire-tuck engine harness is nearly identical to our Mil-spec engine harness line with the primary difference being, the single black wire color and expandable loom. There are quite ..
£0.00
Model: B1-MILSPEC
There are quite a few options available. Please look through them carefully to make sure you get the right connectors! Component Type: Select your connector types.Fuel Injector Plug Type: (Select "BOSCHEV1/HONDA OBD1" by default)The Injector plug dropdown menu has all the options you would need if y..
£712.67
Model: B2-BASE
Our Budget D-series and B-series compatible wire-tuck engine harness is nearly identical to our Mil-spec engine harness line with the primary difference being, the single black wire color and expandable loom used. There are quite a few options available. Please look through them carefully to make su..
£535.40
Model: K-ADAPTER
This adapter is made to allow the installation of a K-Series engine with the 02-04 K20 engine harness. It will also work for our all our K-Series engine harnesses. This wire harness connects your K-Series engine harness to your chassis interior harness while adding the E-plug and all its functions. ..
£355.74
Model: GROUND-KIT
The Rywire ground kit features:- (1) 4 Gauge 20 inch long battery cable. (ring terminal style)- (3) 8 Gauge 14 inch long ground wires.The 3 shorter ground cables can be used for Front and Rear Transmission grounds as well as your Head/Valve cover ground.AAAll grounds are protected with DR-25 high te..
£57.11
Showing 1 to 11 of 11 (1 Pages)